很多企業在進行施工過程中，為了提高自身的利益，持續效率高的進行工作，如果設備因為故障而導致維修的話則會增加很多成本。而通常在操作使用自動上料攪拌機的過程中零件磨損是比較常見的，那么在使用中我們應該要這樣來避免這種情況的發生呢？

In the process of construction, many enterprises work continuously and efficiently in order to improve their own interests. If the equipment is repaired due to failure, it will increase a lot of costs. In general, the wear of parts is common during the operation of the automatic feeding mixer. What should we do to avoid this?

1、保持自動上料攪拌機設備工作的額定載荷

1. Maintain the rated load of automatic feeding mixer

像這類的工程機械設備的載荷性質以及大小對設備零件的損耗都是有著重要影響的，一般機械零件的磨損都是會隨著負荷的增加而增加的，當零件所承受的載荷高于設計的工作載荷時，其部件磨損將會不斷加劇。

The load nature and size of such construction machinery equipment have an important impact on the wear of equipment parts. Generally, the wear of mechanical parts will increase with the increase of load. When the load borne by the parts is higher than the designed working load, the wear of their components will continue to increase.

2、及時清潔，減少對機械雜質對設備的影響

2. Clean in time to reduce the impact of mechanical impurities on equipment

機械雜質一般指的是灰塵、泥土等物質和工程機械在使用過程中自身產生的一些金屬屑、油垢等。這些雜質一旦到達機械的工作表面之間，其危害是很大的：不但使摩擦力增大，油耗升高。而且會破壞潤滑油膜，擦傷配合表面。

Mechanical impurities generally refer to dust, soil and other substances, as well as some metal chips and oil dirt produced by construction machinery during use. Once these impurities reach between the working surfaces of the machine, they will do great harm: not only increase the friction, but also increase the fuel consumption. Moreover, the lubricating oil film will be damaged and the mating surface will be scratched.

3、預防自動上料攪拌車零件腐蝕

3. Prevention of Parts Corrosion of Automatic Feeding Mixer

腐蝕作用在零件上，有時不易被發現，容易被人忽視，危害性更大。雨水、空氣中的化學物質等通過機械零部件的管道、縫隙等滲入機械，腐蝕零件。被腐蝕的零件繼續工作也會使機械加速磨損，增加機械故障。這就要求管理者和操作人員要根據當時當地的天氣情況、工地現場情況，采取合理的施工安排，盡可能減小化學腐蝕對機械零件的危害。

The corrosion effect on the parts is sometimes difficult to be found, easy to be ignored, and more harmful. Rainwater, chemical substances in the air, etc. penetrate into the machinery through the pipes and gaps of mechanical parts, corroding the parts. If the corroded parts continue to work, the mechanical wear will be accelerated and the mechanical failure will be increased. This requires managers and operators to take reasonable construction arrangements according to the local weather conditions and site conditions at that time, so as to minimize the harm of chemical corrosion to mechanical parts.

4、保持自動上料攪拌機設備零件的合理溫度

4. Maintain reasonable temperature of equipment parts of automatic feeding mixer

在工作中，各個零部件的溫度都有各自的正常范圍。溫度過高過低會影響零件的強度，所以需要配合冷卻液和潤滑油控制部分零件的溫度，使他們工作在合理溫度范圍。

During operation, the temperature of each component has its own normal range. If the temperature is too high or too low, the strength of parts will be affected. Therefore, it is necessary to cooperate with the coolant and lubricating oil to control the temperature of some parts, so that they can work within a reasonable temperature range.

很多機械設備在故障開始的時候都是由于零件磨損引起的，自動上料攪拌機在操作運行過程中自然也同樣如此。因此，在使用過程中降低對設備零件的磨損，能夠有效避免機械設備在使用過程中的故障發生。關注我們http://www.jiyini.cn帶您了解更多相關的事項！

Many mechanical equipment are caused by wear of parts at the beginning of failure, and the same is true of automatic feeding mixer during operation. Therefore, reducing the wear of equipment parts in the use process can effectively avoid the failure of mechanical equipment in the use process. Follow us http://www.jiyini.cn Take you to learn more about relevant matters!