對于經常需要使用攪拌一體機的企業來說，使用的攪拌一體機和攪拌一體機配件的工作效率和性能會直接影響到整個生產過程，因此對于攪拌一體機設備的了解顯得十分的重要，關注攪拌一體機設備的安全也是一項重要的內容。

For enterprises that often need to use the mixing machine, the working efficiency and performance of the mixing machine and its accessories will directly affect the entire production process. Therefore, it is very important to understand the mixing machine, and it is also important to pay attention to the safety of the mixing machine.

1、攪拌一體機及攪拌一體機配件的安裝要牢固，盡量選擇較平整的地段，保證行走輪要離開地面，而且機座還要高于地面，這是保證機器正常工作的重要前提。

1. The mixing machine and its accessories shall be firmly installed, and a relatively flat section shall be selected as far as possible to ensure that the walking wheel is off the ground and the base is higher than the ground, which is an important prerequisite for ensuring the normal operation of the machine.

2、攪拌一體機開始工作前要先進行空轉，確定能夠正常工作后再加入攪拌物料。

2. Before the mixing machine starts to work, it should be idling first, and then add mixed materials after confirming that it can work normally.

3、在攪拌過程中要保證在加料的過程中慢慢加水，這是保證攪拌質量的關鍵步驟。（投放的攪拌物料禁止超過額定質量）

3. During the mixing process, it is necessary to ensure that water is added slowly during the feeding process, which is a key step to ensure the mixing quality. (It is forbidden to put mixing materials beyond the rated quality)

4、在加料的過程中，攪拌一體機禁止用各種工具去觸碰機器，更嚴禁用工具伸入攪拌筒內將物料扒出。

4. In the process of feeding, it is forbidden to touch the machine with various tools, and it is more strictly prohibited to stretch tools into the mixing drum to pull out materials.

5、在清除攪拌筒以及料斗內的雜物時，須要將機器的電源切斷，保證在停機的狀態下繼續進行工作。

5. When removing the sundries in the mixing drum and hopper, it is necessary to cut off the power supply of the machine to ensure that the work can continue under the shutdown state.

6、在選擇攪拌一體機工作零件（如軸承、托輥皮帶、攪拌一體機配件等）時，盡量不要一味尋求便宜，多方面比較，爭取選擇性價比較高的產品。

6. When selecting the working parts of the mixing machine (such as bearings, idler belts, parts of the mixing machine, etc.), try not to look for cheap and compare them in many ways, and try to choose products with high cost performance.

在攪拌一體機出現故障時，嚴禁強制運行攪拌一體機器，不但會嚴重縮短機器的使用壽命，還容易引起各種意外事故，正確的做法為立即切斷機器電源，仔細檢查，排除事故發生的原因，再對癥下藥。

In case of failure of the mixing machine, it is strictly prohibited to operate the mixing machine forcibly, which will not only seriously shorten the service life of the machine, but also easily cause various accidents. The correct way is to immediately cut off the power supply of the machine, carefully check, eliminate the cause of the accident, and then apply medicine to the symptoms.

對于攪拌一體機來說，攪拌一體機在生產過程當中帶來的安全隱患問題可能出現的后果可以大，也可以小，只有引起大家的足夠總是，才能消去這些問題。您有相關的問題就來我們網站http://www.jiyini.cn尋求答案吧！

For the all-in-one mixing machine, the potential safety problems brought by the all-in-one mixing machine in the production process can have large or small consequences. Only when they cause enough problems can these problems be eliminated. Come to our website if you have any related questions http://www.jiyini.cn Find out!